CAUTION!
Do not use furniture
cleaning agents or cleaning
agents which can cause
corrosion to clean the appliance.
Cleaning the airflow slots
Use a vacuum cleaner to remove fluff from
the airflow slots.
TROUBLESHOOTING
Problem
1)
Possible cause
Remedy
The tumble dry-
er does not op-
erate.
The tumble dryer is not connected
to the mains supply.
Connect to the mains socket.
Check fuse in fuse box (domestic in-
stallation).
The door is open.
Close the door.
The
On/Off (Ein/Aus) button was
not pushed.
Push the
On/Off (Ein/Aus) but-
ton.
The
Start/Pause button was not
touched.
Touch the
Start/Pause button.
The appliance is in standby mode.
Push the
On/Off (Ein/Aus) but-
ton.
Unsatisfactory
drying result.
Incorrect program selection.
Select a suitable program.
2)
The filter is clogged.
Clean the filter.
3)
Dryness (Trockengrad) option
was set to
iron dry (Bügeltrock-
en)
.
4)
Change
Dryness (Trockengrad)
option to higher level.
The load was too large.
Do not exceed the maximum load
size.
The airflow slots are clogged.
Clean the airflow slots at the bottom
of the appliance.
Dirt on the humidity sensor in the
drum.
Clean the front surface of the drum.
Dryness level not set to desired lev-
el.
Adjust the dryness level.
5)
The condenser is clogged.
Clean the condenser.
3)
The loading
door does not
close
The filter is not locked into position.
Put the filter in the correct position.
Laundry is trapped between the
door and the seal.
Remove trapped items and close
the door.
18
