13
FØRO LS6500 - MANUAL
EN
WARNING:
If the burner fails to ignite, turn the control knob off (clockwise) and also turn the
cylinder valve off. Wait f ive minutes before attempting to relight with ignition sequence.
What to do after glasses on heaters broken:
1. If the heater is not in use, please don’t touch splinters with hands, clean all splinters with
tools to avoid anybody being injured. Ask a professional service provider for installation of
new glasses.
2. When it happens in use, please turn off the cylinder and control valve immediately, clean all
splinters with tools to avoid anybody being injured. And ask a professional service provider
for installation of new glasses.
CLEANING & CARE
•
Make sure that the cleaning is done after the heater is turned off and cooled down.
•
Wipe off powder coated surfaces with soft, moist rag.
•
Do not clean the heater with cleaners that are combustible or corrosive.
•
Remove debris from the burner to keep it clean and safe for use.
•
Open the top back door to clean debris on glass carefully.
STORAGE
1. Always close the gas valve of the gas cylinder after use or in case of a disturbance.
2. Remove the pressure controller and the hose.
3. Check the tightness of the gas valve for damage. If you suspect a damage, change it by your
gas provider.
4. Never store liquid gas cylinders in a sub-terrain, or at places without adequate air ventilation.
