Timer
Setting the Timer to Automatic switch-off:
III.
How to Use
9
After using any of the cooking zones, the cooktop will remain
very hot. Even after turning off the entire unit, the surface of the
cooktop will remain hot for some time. The display for the
cooking zones will display an “H” to warn the user that the
surface is hot to the touch. Wait until the “H” is no longer
displayed to clean the unit. You may turn the unit back on even if
the “H” is displayed.
With the desired heating zone Powered ON, press the “Timer”
key. The timer display will blink and show a “00”, Press the “+” or
“-” to increase or decrease to the desired time until the desired
time appears in the display (Choose up to 99 minutes). Once the
Timer is set, if keys haven't been pressed after 5 seconds, it will
begin to countdown, the timer display will remain lit, the
indicator for that particular burner will flash.
If you want to set another burner to switch-off automatically,
repeat the same steps.
If you want to check the remaining time for another zone, press
the “Timer” until the indicator for the desired burner blinks.
If more than one switch-off time is programmed, the shortest
time remaining will show in the display, the indicator for that
particular burner will flash.
Cancelling the timer:
Press the “Timer” until the indicator for the desired burner
blinks, then press the “+” or “-” to set the timer to
. The Timer
display will blink for 5 seconds and then turn off, indicating that
the timer of selected heating zone has been cancelled.
When the time
is completed, a “beeping” sound will go off indicating that the
time
is up, and selected heating zone shut off automatically.
press “Timer” key to until the desired timer indicator blink,
“00”
