Fornelli PIA 60 INDUZIONE, Руководство пользователя

Страница: 19 / 24

Installation and Operating Manual Installation and Operating Manual
HOBS
17
TROUBLESHOOTING
If you faced troubles when operating the hob, please, read the table below before proceeding
with the actual repairs.
Fault Recommendation
After the hob is switched on, “beep”
sound is missing and the display is off.
Make sure, that:
- power cord and its plug have no damages;
- mains circuit breaker is in good and proper condition;
- there is no power outage in your house.
“Beep Beep” sounds within 30 se-
conds, symbol “E1” is displayed
Make sure, that:
- the you are using is suitable cookware;
- the cookware is correctly aligned with respect to the induc-
tion burner;
The hob has suddenly switched off
with “Beep Beep” sound, symbol “E2”
is displayed
Make sure, that the hob is not overheated.
If the fault is caused by overheating, switch off the hob, let it
cool down and switch it on again. Fan sensor may be dama-
ges, If so, contact service center.
The hob suddenly switches off, heats
up from time to time
Heating up from time to time may occur as part of the war-
ming-up function, certain low-power operating modes, frying
mode, some other modes. This is normal.
The hob has suddenly switched off
with “Beep Beep” sound, symbol “E3”
is displayed
Power surge: voltage increased above 275 V
The hob has suddenly switched off
with “Beep Beep” sound, symbol “E4”
is displayed
Power surge: voltage dropped below 100 V
The hob has suddenly switched off
with “Beep Beep” sound, symbol “E5”
is displayed
E5 error indicates glass surface temperature sensor defect,
Please, contact service center.
The hob has suddenly switched off
with “Beep Beep” sound, symbol “E6”
is displayed
Wrong button has been pushed, liquid has boiled away/insuf-
ficient amount of liquid
The hob has suddenly switched off
with “Beep Beep” sound, symbol “E0”
is displayed
Internal component failure, Please, contact service center.