Formosa XG-520, Руководство пользователя

Страница: 55 / 60

55
Other Unix Systems
To access the Internet via the Wireless Router:
•
Ensure the "Gateway" field for your network card is set to the IP Address of the Wireless
Router.
•
Ensure your DNS (Name Server) settings are correct.
Wireless Station Configuration
•
This section applies to all wireless stations wishing to use the wireless router's access point,
regardless of the operating system that is used on the client.
•
To use the wireless portable router in the wireless router, each wireless station must have
compatible settings, as following:
Mode The mode must be set to Infrastructure .
SSID (ESSID)
This must match the value used on the Wireless Router.
Note! The SSID is case sensitive.
Open System /
Shared Key
If there is no security is enabled on the Wireless Router, the security of
each station should be disabled as well. And, you can connect the
Wireless Router without security, but it is not recommended.
WEP
By default, WEP on the Wireless Router is disabled.
•
If WEP remains disabled on the Wireless Router, all stations must
have WEP disabled.
•
If WEP is enabled on the Wireless Router, each station must use the
same settings as the Wireless Router.
WPA-PSK/
WPA2-PSK/
WPA-RADIUS/
WPA2-RADIUS
WPA-PSK (TKIP/AES)/ WPA2-PSK (TKIP/AES)/ WPA-RADIUS
(TKIP/AES)/ WPA2 -RADIUS (TKIP/AES): If one of these securities is
enabled on the Wireless Router, each station must use the same settings
as the Wireless Router.
Note: By default, the Wireless Router will allow both 802.11b and 802.11g
connections.