Formosa XG-520, Руководство пользователя

Страница: 14 / 60

14
WLAN must use the same SSID. It is case-sensitive and must not
exceed 32 characters. A device will not be permitted to join the
BSS unless it can provide the unique SSID. A SSID is also
referred to as a network name because essentially it is a name
that identifies a wireless network.
Channel Number Allow user to set the channel manually or automatically. If set
channel manually, just select the channel 1~11 you want to
specify. If “Auto” is selected, user can set the channel range to
have the Wireless Portable Router automatically survey and
choose the channel with best situation for communication. The
number of channels supported depends on the region of this
Access Point. All stations communicating with the Access Point
must use the same channel. Default setting is
Auto .
Mode Select the mode form the pull-down list including AP and WDS
Repeater .
Security Click the Setup button the Wireless Security Setup page will
pop up.
Authentication : Select an authentication from the pull-down list
including Open system or Shared Key, Open System, Open
System with 802.1x, Shared Key, WPA-RADIUS, WPA-PSK,
WPA2-RADIUS
and WPA2-PSK .
Encryption : For Open system or Shared Key and Open
System authentication modes, the selection of encryption type
are None and WEP . For Open System with 802.1x and Shared
Key authentication modes, the selection of encryption type is
WEP . For WPA-RADIUS, WPA-PSK , WPA2-RADIUS and
WPA2-PSK authentication mode, the encryption type supports
both TKIP and AES .