formlabs Form Cure, Руководство пользователя

Страница: 14 / 31

14
Like any heating appliance, a fire may occur if the Form Cure maintains extended contact with
flammable materials, such as walls or curtains. Keep the Form Cure away from walls and curtains.
Keep the area surrounding the turntable clean, and only post-cure parts that have been
completely dried. Accumulation of cured material creates the possibility of malfunction.
3.1.3 Light and Heat
The Form Cure uses heat and 405 nm light to post-cure 3D printed parts. The cover includes
an interlock system that is designed to automatically pause heating and extinguish the cure
lights when the cover is open.
For best results, avoid opening the cover while the Form Cure is operating.
3.1.4 Resin
Respect Formlabs resin like any household chemical. Follow standard chemical safety
procedures and Formlabs resin handling instructions.
In general, Formlabs resin is not approved for use with food, drink, or medical applications on
the human body. However, biocompatible resins, such as Dental SG, are biologically safe for
specific types and lengths of exposure to the human body. Refer to information about each
specific resin for more detail.
Wear gloves whenever handling liquid resin or isopropyl alcohol.
Never ingest resin in liquid or solid form. If swallowed, immediately call a poison
center or medical professional.
Always consult the SDS (Safety Data Sheet) as the primary source of information to
understand safety and handling of Formlabs materials. Combinations of resin and
solvents should be handled according to the restrictions of both. For questions,
consult the appropriate SDS(s).
3.1.5 Radio Interference
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to CFR Title 47, Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at their own expense.
Changes or modifications to this product not authorized by Formlabs could void the
electromagnetic compatibility (EMC) and negate your authority to operate the product.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
NOTICE
WARNING
WARNING
NOTICE
CAUTION