Formax Square IT 2 Скачать руководство пользователя

Страница: 3 / 42

Introduction

This manual contains instructions on the operation and maintenance of this machine. To

get maximum versatility from this machine all operators should carefully read and follow the

instructions in this manual. Keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains information

related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

How to read this manual

Notation conventions

Whenever necessary, the following points for attention are indicated in this manual.

WARNING:

Indicates a potentially hazardous situation which, if instructions are not followed,

could result in death or serious injury.

CAUTION:

Indicates a potentiality hazardous situation which, if instructions are not followed, may result

in minor or moderate injury or damage to machine or property.

NOTE:

This sign refers to:
• Remarks for making the operation much easier. You get practical hints or knowledge to

assist you in the machine operation such as:

• Preparations required before operating

• How to prevent papers from being misfed or damaged

• Precautions required or actions to take after misoperation

• Limitations like numerical limits, functions that cannot be used together or conditions,

under which a particular function cannot be used or obtained.

• Information.

Содержание Square IT 2











































Результаты поиска

Содержание Square IT 2

Отзывы:

Похожие инструкции для Square IT 2

Бренды по названию

Популярные бренды

Formax Square IT 2, Руководство оператора

Результаты поиска

Содержание Square IT 2

Отзывы:

Похожие инструкции для Square IT 2

Бренды по названию

Популярные бренды