ISSUE
: 21/09/03
FD 6100 MAINTENANCE
MANUAL
REVISION
: 2.1
SECTION
: 01
PAGE 39
CONTENTS
3
SOFTWARE UPGRADE AND CPU BOARD REPLACEMENT
3.1 SOFTWARE
UPGRADE
Note: the use of an anti-static bracelet is recommended for the handling of PCBs
1
Switch off and unplug the machine
2
Remove the top cover
3
Disconnect the top connectors on the MAIN PCB
4
Unscrew ( see section 1 chapter 5.2.2)
and pivot the MAIN PCB
5
Replace the flash
6
Fit the MAIN PCB back and reconnect the cables
7
Put the top cover back
8
Plug and switch on the machine
3.2
CPU BOARD REPLACEMENT
When the LOGIC PCB is replaced, all the data stored into the RAM are lost. The following settings have then to be done:
Perform a RAM Reset
Set the machine serial number (Service Mode)
Set the total counter (Service Mode)
Set the Authorisation code
Customize the language (Advanced CONTENTS \ language)
Customize the envelopes format (Advanced CONTENTS \ set format)
Check the envelope inserting position for kind of envelope (Advanced CONTENTS)
Check the envelope moistening position (Advanced CONTENTS).
Set the jobs according to the applications (User CONTENTS).
Adjust the offset between documents of feeders A and B for each job using these combinations of feeders (Advanced
CONTENTS).
Flash Memory
Содержание FD 6100
Страница 2: ...ISSUE 21 09 2003 FD 6100 MAINTENANCE MANUAL REVISION 2 1 SECTION CONTENTS PAGE 1 FD 6100 ...
Страница 19: ...ISSUE 21 09 03 FD 6100 MAINTENANCE MANUAL REVISION 2 1 SECTION 01 PAGE 18 CONTENTS 1 5 3 MAIN PCB PART 2 1 5 4 ...
Страница 20: ...ISSUE 21 09 03 FD 6100 MAINTENANCE MANUAL REVISION 2 1 SECTION 01 PAGE 19 CONTENTS 1 5 5 FEEDER PCB 1 5 6 ...
Страница 45: ...ISSUE 21 09 03 FD 6100 MAINTENANCE MANUAL REVISION 2 1 SECTION 01 PAGE 44 ...