background image

OMR Basic License

For the OMR basic license, the following functions are available:

• Start Mark: Indicates the start of the code.
• Insert/Accumulate: Defines when a document set is complete and must be inserted

into an envelope.

• Parity check: By adding a parity mark the reading code can be checked. The sum of

the marks must be even.

• Safety Mark: Is used as an extra security. With skewed paper, the reading head can

miss part of the reading code. In these situations, the safety mark is not read, and
the system will give an error. The safety mark also indicates the end of the reading
code. This mark must always be present on the document if it is part of the code
definition.

The minimum code is one line: Insert/Accumulate. It is advised for

reliability to use the function Start Mark. The function Start Mark is

mandatory in case other functions are used.

Default “ no mark printed” means Accumulate and “mark printed”

means Insert. If required, the service organization can set the

function Insert/Accumulate to: “ no mark printed” means Insert and

“mark printed” means accumulate.

44

|  Page 44 | okt-05-2012 11:39 |

6

English

Содержание 6206 Series






















































































Отзывы: