2.
Put a small stack of documents between the side guides.
3.
Move the side guides toward the documents. The play between the side guides and
the documents should be about 0.5 mm (0.02'').
Use an envelope to measure the play. If an envelope fits between
the documents and the side guides over the whole length of the
feeder, the play is correct.
4.
Place a stack of documents in the feeder, do not place more documents than indicated
by the "max" symbol on the feeder. See the previous figure for the correct orientation.
Make sure the paper touches the stop.
Refer to the specifications for the maximum amount of
documents you can load into the feeder.
2
English
13
| Page 13 | okt-05-2012 11:39 |
