Backrest tilt
We recommend you use the backrest free-float mode and
tension control to allow dynamic movement in the chair,
however, you can lock the backrest angle by lifting the rear
button under the left side of your seat and leaning back
until you find your preferred position. Lower the button to
lock the backrest.
Seat height
Raise the seat height by lifting your weight off the chair and
pulling up the front button under the right hand side of your
chair. To drop the height, sit on the chair and the chair will
lower. Aim to have your knees slightly lower than your hips and
your feet flat on the floor. Lock the seat height by lowering the
button back to its neutral position.
Seat slide
Lift the seat slide button to adjust the seat depth. Move the
seat back or forward to your preferred position – you should
leave 2cm between the seat and the back of your knees. Push
the button back down to lock the seat’s position.
F-FORM
UNDER SEAT BUTTONS
