Installation
5
1
）
Ensure the video source output of the camera is OK, and the HD monitor
is powered on and switched to connected video input port.
2
）
Ensure 2 TX antennas are installed. For optimal results set the dual
antennas in the form of a “V” and maintain unobstructed line of sight
between transmitter and receiver. Below figure for your reference.
CH
OK
VIDEO
LINK
X150
FOR
HOPE
3
）
Ensure all input, output SDI or HDMI cables are connected.
4
）
Ensure both transmitter and receiver are powered via battery or DC input.
Then turn on power switch of the transmitter and receiver respectively. The
POWER indicator will then light.
5
）
Ensure the transmitter and receiver is set with the same frequency.
6
）
If the camera is on and video input is OK, TX side VIDEO indicator will light.