Attached Garden Pergola www.foreverredwood.com
Step 7.
Attach
the 22” diagonal braces to dual supports and posts. Attach the 29” diagonal braces to end
rafters and posts with bolts, washer and nuts as shown below:
Step 8.
Attach the rest of the arches to the dual beams with deck screws (3" x #8) at 45 degree angles.
There are 8 screws used per rafter (2 per dual support beams). Make sure each rafter's notches are snuggly
into the dual support beams before adding the deck screws. The dual support beams have lines marking the
exact spot to attach the rafter. The interior rafters do not have numbers. They are all cut identically and are
interchangeable. Just make sure to stay to the markings on the dual support beams to keep the spacing exactly
the same.
6” x 5/16” Bolt,
washers & nut.
8”x 3/8” Bolt,
washers & nut.
4 ½” x 5/16” Bolt,
washers & nut.