Attached Garden Pergola www.foreverredwood.com
STEP 3: Attach metal anchor to concrete with anchor
bolt (½" x 4") and place the post.
STEP 4: Attach post to metal anchor with lag bolts (5/16"
x 3") and add wood trim to hide metal when finished
The photos above show the 4 simple steps to follow once your surface below the Pergola is in place. Choose the anchor kit
for the appropriate surface:
Stone, Brick or Concrete - Anchor Bolts (1/2") for attaching to stone, brick, or concrete.
Wood (e.g., Wood Deck) - Lag Bolts (3/8") for attaching to a wood deck.
Step 2.
Attach the ledger board to the wall. The distance from the ground to the bottom of the ledger must
be 7’-10 ¾” (see approved drawings-Revision G). Using 3/8" lag screws @ 16" o.c. with 3" min. penetration into
the wall studs.