FORESTAL Siryon, Руководство пользователя

Страница: 29 / 46

Adjust the seat height. Adjust suspension pressure.
Extend the dropper post by pressing the
left lever with the left thumb, then adjust
the approximate height of the seat, and
tighten the saddle with 4mm hex key.
Sit on the seat and assess the height
by placing your heel on the pedal and
rotating the crank to the lowest position.
If the leg is fully extended while your
heel is on the pedal and you are sitting
comfortably on the seat, this means
you have the right seat height. If not,
please repeat the process until you
reach the correct seat height.
Observe the minimum and maximum
insertion on the dropper post and never
exceed it. By exceeding it, you are risking
frame damage and injuries.
Adjust suspension pressure only with a
high-pressure suspension pump. The air
chamber for Rock Shox and Fox front
suspension is located on top of the left
leg while Öhlins uses the right leg for its
air chamber assembly. Unscrew the
protective cap from the top and attach
the suspension pump.
Rear suspension air valve is usually
located on the side of the shock.
Air pressure in air forks and shock need
to be precisely adjusted to your weight
before the first use of the bicycle. You can
find detailed instructions on how to set up
your suspension air pressure in our
Suspension setup guide in:
www.forestal.com/usermanuals
27