background image

11

SAFETY NOTES

Always set the most adequate temperature.
It is recommend to set the temperature 
about 5°C cooler than the outside 
temperature to reduce energy costs.

Keep doors and windows closed when the
air conditioner is running, otherwise it could
affect the air conditioner cooling efficiency.

Do not splash water or other liquid on the
air conditioner to prevent risks of electric
shocks or unit malfunction.

Do not use the air conditioner for other pur-
poses than what it is designed for (such as
drying clothes, preserving foods, etc.).

The air conditioner must be properly 
grounded.  Do not connect the ground to
gas or water pipes, lightning rods, lighting
poles or telephone/cable lines.

Do not leave animals or plants exposed
directly to the coolling airflow for long 
periods of time.

Louver of left/right
direction

• The airflow direction can be moved

upward or downward when unit is 
running.

• Make sure that the air outlet grills and 

intake vents are free from obstructions.

WARNING

To eliminate risks of vibrations and damage
to the compressor, make sure the air 
conditioner is properly connected and
powered with 115 V 1 ph.

Unit working temperature range:
Do not operate unit if outside temperature
is below 18°C or above 43°C or you could
damage the compressor and void the 
warranty. 

Louver of upward/
downward direction

Содержание 13-05022






























Отзывы: