Casement window :
It is recommended to replace the
screen with a clear plexiglass panel
(1/4'') fitted to the size of your
window screen. Cut a hole to the
same size as the end of the exhaust
window adaptor. Correctly fit on the
adaptor.
Sliding windows :
Install the window slider kit vertically
or horizontally within the inside
frame. If necessary, screw the slider
kit on the frame. Close the window
onto the window kit to form a tight
seal. Then attach the exhaust hose
adaptor to the window slider kit; the
adaptor tabs will lock into place the
adaptor to the window kit.
INSTALLATION
7
NOTE :
Using the window slider kit may make it difficult to correctly close and/or lock the
window. Additional safety precautions should be considered.
Make sure to correctly install and insulate the window slider kit. It must perfectly fit into the
window. The length can be adjusted from 85 to 123 cm (33
1/2
” to 48
3/8
”). The two pie-
ces are also easy to cut and slide well into each other. Tape the edge around the slider kit to
stop insect or bug intrusion (tape not included).
TIMER
MODE
HUNG
WINDOW
SLIDING
WINDOW
CASEMENT
WINDOW
WINDOW KIT INSTALLATION
