FRONT
BACK
1
2
Lay out the Front Fascia and Side Fascias on a flat surface to help line up accurately.
Screw the corners together as
shown above.
Ensure all of the faces and edges are
flush. Screw into place with 120mm screws.
Once you have secured the fascias together, position the
Slatted Inserts
.
Screw into position with 2 x 50mm screws
at the top and bottom of each insert.
4 x 50mm screws per insert. (If you have a Slatted Insert missing, use the
labelled number as a reference to the components list.)
CONSTRUCTION
130mm
750mm
PREPARATION
We
strongly advise
that you
anchor
your pergola down with either fixtures shown below to
enhance stability.
You will need to purchase these
separately.
Apply each fixture to each leg before fully constructing your pergola. 130mm of your post will be supported within the fixture.
FOR PATIO/DECKING (HARD SURFACES)
Easy-Fit Fencebase - 90mm
(FBEF90)
FOR GRASS/SOIL
(SOFT SURFACES)
Easy-Fit Fencefast
(FEF9075)
Ensure that the spike can be
inserted into the ground by
750mm.
FRONT CORNERS
BACK CORNER
120
MM
SCREWS
FRONT FASCIA
SIDE FASCIA
SIDE FASCIA
1
2
3
4
5
