9
Fix the Short Base (1200mm) into place, by screwing
into the battens beneath as shown above.
The Short Base (1200mm) will sit on top of the
battens provided.
The panel battens will sit into the
base’s notches.
The Long Base (1560mm) will sit on top of the battens
provided.
The panel battens will sit into the base’s
notches.
100
MM
SCREWS
TOP TIP - MARK OUT WHERE EACH BATTEN IS LOCATED TO ENSURE YOU
SCREW DIRECTLY INTO THEM ONCE THE BASE SITS ON TOP.
TOP TIP - MARK OUT WHERE EACH BATTEN IS LOCATED TO ENSURE YOU
SCREW DIRECTLY INTO THEM ONCE THE BASE SITS ON TOP.
Layout and position the Jute Liner material inside
your planter.
Overlap over the top edge and use the
Fascias to hold into place.
Secure the Fascias to the Panels.
Ensure the Jute Liner
is held in position when screwing the Fascias into place.
10
JUTE LINER
FRONT PANEL FASCIA
BACK PANEL FASCIA
END PANEL FASCIA
11
CHECK & TIGHTEN ALL FIXINGS APPLIED TO THE
PRODUCT ON A REGULAR BASIS
