forest river Starcraft Bus, Руководство пользователя

Страница: 21 / 30

CAUTION
: Overloading your vehicle can cause your tires to overheat resulting in
too much friction. This can cause an “air-out” resulting in a serious accident.
CAUTION
: Mixing different sizes or types of tires (radial and bias-belted) can cause
the vehicle to handle improperly which could cause you to lose control while driving
resulting in a serious accident. You must use the same size and types of tires on all wheels.
NOTICE: Failure to keep the tires properly inflated can cause needless wear of tires.
Custom Paint Graphics
Custom paint should not be waxed within 90 days of the manufacturing production date of the
bus. The complex chemistry of today’s automotive paints continues to cure and harden during
this time.
After its final curing period, a high-quality hand-applied wax designed for automotive finishes
may be used on the body and fiberglass parts.
It is recommended to wax the unit at least every 6 months to enhance and protect the paint.
NOTICE Applying a wax within 90 days of the manufacturing production date can result in
damaging the integrity of the paint.
Vinyl Graphics
•
To avoid the possibility of damaging the vinyl graphics, do not clean with any solvent or
cleaner other than a mild detergent designed for automotive finishes.
•
Mechanical power spray washers should not be used directly on the vinyl graphics.
•
Automotive wax should not be applied to the tape as it may result in an unattractive buildup
to the color.
NOTICE Using a high-powered spray washer directly on the vinyl graphics could result in
tearing or lifting of the vinyl graphics.
Destination Signs
A destination sign will be located in the overhead cab. The sign can be one with a decal adhered
on the inside of the Plexiglass or a scrolled sign that is attached to a tube and changed by turning
the handle to the desired information.
To access a removable or scrolled sign with a light, open the door in the front overhead panel.
The door has two screw latches that will turn to allow the door to open outward.
•
For a lighted sign, be careful not to scratch the sign or Plexiglass when changing the bulb.
•
For the removable or scrolled sign, periodically check to ensure the sign is straight.
20
•
The Plexiglas can be cleaned with a warm soap and water based solution or a standard glass
cleaner.