forest river Starcraft Bus, Руководство пользователя

Страница: 15 / 30

Window Maintenance
Daily check all moving parts on and around the window and latch areas.
Glass – Inspect daily for damages, cracks or chips that could result from road debris, such as
stones. Repair or replace the glass as necessary. Clean by using a standard glass cleaner or
ammonia based solution and a soft cloth to remove the road film and dirt.
Slider track – Inspect daily and remove any dirt debris that may have developed in the track. To
ensure the slide will move freely in the track, use a small amount of silicone based spray in the
track to help keep the slider moving freely.
Weep holes – (Small holes located at the bottom seal of the window for drainage) Check for dirt
and debris that may have lodged in the drain holes. Use a small thin object to insert into the
drain holes to remove any obstructions.
Doors
The original factory driver’s door is utilized on Ford and Chevrolet models. All other entry doors
are manufactured and installed by Starcraft.
Manual Bi-Fold Entry Door
This is a two-panel door opened by using the manual door mechanism located in the cab area
next to the driver. To open, lift the retaining lever holding the door handle in place and push the
handle outward. To close pull handle back until the handle is properly secured back into the
retaining lever.
CAUTION
: Driving without the handle properly secured in the retaining lever could
allow the door to open causing injury. It could also cause damage to the door or handle.
Electric Bi-Fold Entry Door
The control switches location will depend on the make and model of your unit.
Simply press up on the door control switch to activate the electric motor and the door will open
outward; press down to close the door.
NOTE: The engine does not have to be running for this feature to work.
Electric Entry Door Key Switch
Use this switch to open and close door from the outside of the bus (located on the exterior panel
in front of entrance door). To open, place the key in the lock and turn to the horizontal position.
Turn the key back to the vertical position to close.
14