Quick Fire Sawhorse
Operation
6
STEP 6:
Begin by cutting the initial few
logs from the long overhanging
end of the log and cut succes-
sive logs so as to maintain the
ratio of approximately 1/3 of
the remaining length forward
of the log support frame and
2/3 behind.
IMPORTANT:
Check that the log is secure and the sawhorse
stable before beginning to cut.
IMPORTANT:
With heavy and long logs, the weight of the
log is sufficient to engage the teeth. Do not press down on
the long overhanging end of the log as this may result in
damage to the sawhorse.
STEP 5:
Rest the log on the lower
teeth on the cross bar and
slowly release the weight so
that the upper teeth engage
with the log.
The log should be
approximately horizontal with
1/3 of its length forward of
the log support frame.
1/3 length
2/3 length
