Quick Fire Sawhorse
Operation
4
STEP 1:
Ensure that the ground on
which you are placing the
sawhorse is firm and level.
With the sawhorse lying on the
ground, lift the log support
frame into the vertical position.
STEP 2:
Remove the wing nuts from the
bolts at the front of the base.
Rotate the diagonal braces
from their stored position
and fit the holes in the ends
of the braces over the bolts
then replace the wing nuts and
tighten them.
IMPORTANT:
DO NOT use the saw horse without securely
tightening the wing nuts holding the diagonal braces in
place.
