7
FM22P Petrol Log Splitter
STEP 3
Lift the ram assembly (9) (caution it is heavy)
onto the beam and engage the two round
projections at the front, in the U shaped
slots in the mounting plates. Note the con-
trol levers must be positioned as shown in
the adjacent figure.
While one person supports the ram assem-
bly, place the ram locating plate (5) over
the ram so that the u slots engage with the
round projections on the ram assembly.
Secure the plate with the 8 M10 flat wash-
ers (8), 8 M10 spring washers (7) and 8 M10
bolts (6). The flat washer should be placed
against the plate, with the spring washer be-
tween it and the head of the bolt.
Assembly
STEP 4
Place the moving pusher blade (3) on the
end of the beam. Insert the base of the
blade under curved guide rails and slide
it along the beam so that the tubular
mount on the back of the blade engages
with the ram. Secure the blade to the ram
with the M10 bolt (2) and M10 nut (4).
