4
FM22P Petrol Log Splitter
MACHINE USE AND CARE
Position the machine in such a way that it cannot
move during maintenance, cleaning, adjustment,
assembly and under storage.
Do not change the engine governor settings or
over-speed the engine. The governor controls the
maximum safe operating speed of the engine.
Do not run the engine at a high speed when you
are not working.
The machine contains a static blade and a moving
blade, keep hands away from both blades when
operating the machine.
Avoid contact with hot oil, exhaust fumes and
hot surfaces. Do not touch the engine or exhaust,
these parts get extremely hot from operation
and remain hot for a time after the unit is turned
off. Allow the engine to cool before doing
maintenance or adjustment.
If the machine should start to make an unusual
noise or vibration, immediately shut off the
engine, disconnect the spark plug wire and
check for the cause. Unusual noise or vibration
is generally a warning of trouble.
Maintain the machine. Check for misalignment
or binding of moving parts, breakage of parts
and any condition that may affect the machines
operation. If damaged, have the machine repaired
before use. Poorly maintained equipment can
cause accidents.
Whenever you leave the operating position or if
you have to remove processed material or debris
from around the machine, always shut down the
engine.
DO NOT
change the splitting position while the
engine is running. Various parts of the engine
become very hot and contact can cause serious
burns.
NEVER
attach a rope, cable or other device to the
control levers of the log splitter.
DO NOT
tilt the machine while the engine is
running,
Always stop the engine before moving the
machine.
Do not alter or adjust any part of the machine
or engine that is sealed by the manufacturer or
distributor.
Always check the oil level of the engine before
use.
Inspect all nuts and bolts to ensure they are
tight and properly connected before using the
machine.
Check the air pressure in the tyres prior to use
and pay attention to sharp objects when moving
the machine to prevent the tyres being pierced.
TOWING
This log splitter is for off road use only. Never
attempt to tow the machine on public, highways,
roads or thoroughfares.
Serious injury or death can occur if towing safety
rules are not followed.
Always secure and lock the log splitter to the
vehicle hitch before moving.
Drive safely. Be aware of the added length of the
log splitter.
Never ride or transport cargo on the log splitter.
Turn off the vehicle before leaving the log splitter
unattended.
Block the log splitter wheels to prevent unintended
movement.
DO NOT
tow the log splitter if the tires are worn
or will not hold air.
DO NOT
exceed the maximum 5 MPH towing
speed.
WARNING!
The warnings, cautions and
instructions referred to in this manual cannot
cover all possible conditions and situations that
may occur. It must be understood that common
sense and caution must be applied by the
operator when using the log splitter.
When not in use, store the log splitter in a safe,
dry, childproof location.
Safety
