6.
Move the base assemblies (F) and (G) to required positions. Tighten the four red locking
clips (E) by tightening clockwise. You can
pull on the clip and rotate it
, if it causes any
obstruction.
7.
Attach the reflective glass to the glass frame (A) - Velcro strips on the glass edges and on the
glass frame will hold it in place. Ensure that the small circle sticker on the glass faces the
presenter and the other side faces the camera.
8.
Attach the black cloth hood to the glass frame (A) outer edges by marrying the Velcro strips.
Tighten the cord around your camera lens by pressing the cord clip and releasing when tight.
Note: If using a mobile to record, the hood can be placed loosely around the mobile.
If glass frame (A) does not have Velcro strips attached to the outer edges:
Your kit may come without the Velcro strips already attached to the outer edge of the glass
frame. In which case, Velcro strips with tape backing will be supplied. Simply remove the
tape backing and stick the Velcro pieces to the glass frame as below.
