Carefully turn the table top (A)
upside down on
a
soft
surface.
Loosely attach the table legs (B) to table top (A) with bolts (D)
through large flat washers (E), large lock washers (F) and nut (G)
using wrench (N). As shown in figure 1and figure 3.
Do not tighten the bolts at this point.
(Figure 1)
Loosely attach the leg connector brace (C&M) to table legs (B) with
bolts (I) through small flat washers
(J)
,and small lock washers (K)
using hex screw driver (O). As shown in figure 2 and figure 3.
Do not tighten the bolts at this point.
(Figure 2)
1
2
Figure 1
Once all the table legs are aligned correctly, tighten all bolts (D&I)
with wrench (N) and hex screw driver (O). With the help of another
person, carefully turn the table to the upright position. Cover all bolts
(D&I) with nut cover (H) and PVC cover (L).
(Figure 3)
3
Figure 3
Figure 2
J
K
L
I
A
B
M
2
1
1
2
A
B
B
C
C
