USER MANUAL
200W LED MOVING HEAD SPOT BEAM WASH LIGHT
Ⅶ
OPERATION AND CONTROL
1. Control panel
Button:
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
DMX input:
For DMX512 link, use 3/5-pin XLR cable to link the unit together.
DMX output:
For DMX512 link, use 3/5-pin XLR cable to link the unit together.
Mains input:
Connect to power supply.
Mains output:
Connect to supply power to the next unit.
Fuse (T 6.3A):
Protect the unit from damage of the over-current.
2. Main Functions
To select any of the given functions, press the
MENU
button up to when the required one is
showing on the display. Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the mode. Once the required mode has been selected,
press the
ENTER
button to setup, to go back to the functions without any change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one
minute to exit the menu mode.
menu map:
08
09