9
Note: Only the fault is solved, the instrument can exit from the fault code
display . Turn off the power supply before the fault is solved.
After power-on status, long press key
“+” and key “-” at the same
time, enter into the state of user settings after 3 seconds.
Firstly,
it’s miles and KM switch setting after entering into level I setting.
Short press "+" button or press "-
" button to switch from "Km" to “miles”.
The setting interface is as following:
3
05
Turn fault
10
12
Current sensor fault
4
06
Low voltage
protection
11
21
Speeed sensor fault
5
07
Over voltage
protection
12
22
Battery communication fault
6
08
Motor Hall singal
Line fault
13
30
Instrument communication
fault
7
09
Motor Phase line fault
11 User settings
11.1 Miles/ KM switch setting
