Ford VCMM, Руководство по оборудованию

Страница: 7 / 36

V C M M H A R D W A R E M A N U A L
5
WARNING: DO NOT allow any cables to become entangled with operator or driving
controls. This can cause interference with driving and can cause injury.
DO use this equipment in accordance with the operating procedures.
Before carrying out maintenance and cleaning of the VCMM , make sure the unit is NOT connected to a
power source, vehicle, or PC. Use only a well-diluted, mild, non-abrasive cleaning agent applied using a
soft, lint free cloth.
DO NOT use or apply undiluted cleaning agent directly to the equipment surface and NO NOT soak the
cloth. Take care that cleaning fluid does not enter connector receptacles. DO NOT expose this equipment
to spilled liquids.
DO NOT continue to use this equipment if you have ANY doubts that it may not be working properly or if it
is damaged in anyway. Contact your regional technical support for assistance .
DO NOT remove any fixed covers unless you are authorized/qualified to do so.
A defective electrical earth (ground) connection to any equipment may cause an electric shock hazard.
This hazard may pass through the signal cabling and to any other equipment interconnected. It is
recommended that you check electrical wiring at frequent intervals and whenever alterations are made.
DO keep the VCMM away from devices that generate radio interference.
NOTICE: Do ensure the VCMM is not subjected to extreme temperature or prolonged exposure to
direct sunlight that may cause heating of the VCMM.
NOTICE: If any liquid is spilled on this equipment remove the power immediately and ensure that
it is dried out completely before restoring power.
WARNING: If equipment is used in a manner not specified by the manual, the protection
provided by the equipment may be impaired.