Ford VCMM, Руководство по оборудованию

Страница: 32 / 36

V C M M H A R D W A R E M A N U A L
30
VCMM Technical Specifications
Voltage and Power
Requirements 7 – 32 VDC, 20 Watts max
Note: protected against reverse battery polarity
Power Sources
- 12 & 24 volts vehicle power (using DLC cable or Battery Power Cable)
- External AC/DC 16 volts power supply. Use only Bosch 1699200573
power adapter supplied with the kit (Sinpro Electronic model number
EPU20A-107) Input 100-240 VAC, 47-63Hz, 0.5A. Output 16 VDC, 1.25A.
- USB power (5 volts from a PC USB port)( Note: USB power is not
adequate for normal operation)
Vehicle Protocols
- CAN (High & Medium Speed)
- FT CAN
- SCP (SAE J1850 PWM) - SAE J1850 VPW
- ISO-9141 (K & L lines)
- UBP
Host/Client/Wireless Interfaces - High Speed USB 2.0 Client (480 Mbps)
- High Speed USB 2.0 Host (480 Mbps)
- High Speed USB 2.0 Host (480 Mbps) for wireless adapter use
- Wireless USB 2.0 adapter (IEEE 802.11 b/g/n),
if equipped
- 100baseT Ethernet
Measurement Interfaces - 4 Channels of High-Speed (8 Msps) external inputs – independently
galvanically isolated
- 1 Channel of High-Speed (16 Msps) internal input (from DLC)
- 1 Signal Generator output (0-30VDC at 100 mA drive - common ground
with DLC)
- The 4 Channel Measurement Interfaces are self-calibrating and periodic
user calibration is not required
User Interface 6 LEDs (Vehicle, PC, Measurement, Error, Power & Play/Stop), audible
signaling device, User Input button, Recover button
Host PC USB Cable Detachable 3.05 m (10 ft) with molded USB 2.0 connector
Vehicle DLC Cable Detachable 1.83 m (6 ft) with molded DLC connector
CFR Pendant Cable (optional)
Detachable 1.83 m (6 ft) with 2 LEDs, 7-segment display, audible beeper,
pushbutton and molded USB type A connector
Case Shock resistant polycarbonate case with rubber protective end boots, 1m
free-fall drop impact resistant on all surfaces
Dimensions/Weight Size: H: 5.0 cm (2.0 in) W: 17.9 cm (7.1 in) L:21.3 cm (8.4 in)
Weight: 0.80 kg (1.75 lb.) without cables
Environmental:
Temperature & Humidity Operating: VCMM unit: -20ºC to 63ºC (-4ºF to 145ºF)
Wireless USB 2.0 adapter: 0ºC to 50ºC (32ºF to
122ºF) at 10% to 90% RH non-condensing
Storage:
-40ºC to 85ºC (-40ºF to 185ºF) at 10% to 90% RH non-
Condensing
Chapter
5