10
Load Bed Access
Load Bed access using Stirrup Steps
This alternative method of Load Bed access should only be used where the
normal access system using the sideboard steps is impracticable, for example;
to avoid load spillage when lowering the sideboard. A suitable fall arrest system
is recommended. Maintain the three point contact rule for entering and leaving
the Load Bed. (Nearside of vehicle shown)
To access the Load Bed:
1 Grasp the Grab Handle with the left hand.
2 Place the left foot on the Stirrup Step treadplate and the right hand on the
sideboard to steady yourself.
3 Lift the right leg and swing it over the sideboard and onto the load bed whilst
momentarily releasing the right hand to allow the right leg to pass over the
sideboard.
4 Push with right leg whilst raising left leg over sideboard to complete climb.
Maintain grip on the grab handle until appropriate hand holds are found
when attending to the payload.
Mirror nearside procedure when using offside grab handles and sideboard step.
Transit Dropside 2014:11-12 Seat Transit 28/11/14 10:52 Page 13
