1
POWER-ADJUSTABLE PEDALS
Located on the left-hand side of the steering column, press
the arrow to move the accelerator and brake pedals
farther away from you; press and hold the arrow to
move the pedals closer.
Note: Adjust the pedals only when the vehicle is
in park (P).
2
POWER TILT AND TELESCOPING
STEERING COLUMN
*
Lets you adjust the position of the steering column. Use
the 4-way control on the side of the steering column. The
column automatically moves to the full up position when
you switch the ignition on. You can save and recall the
steering column position with the memory function. For
more information, please see the Memory Function
chapter in your Owner’s Manual.
3
CRUISE CONTROL
*
To set the speed:
A. Press and release ON.
B. Accelerate to the speed you desire.
C. Press SET+ and take your foot off the accelerator.
To set a higher or lower speed, either press and hold or
press SET+ or SET– repeatedly until you reach the speed
you desire. To cancel a set speed, press and release CNCL
or tap the brake pedal.
To return to a previously set speed, press RSM.
To switch off, press OFF or switch the ignition off.
4
STEERING WHEEL CONTROLS
Use the controls to adjust frequently accessed features.
Use the left-hand controls to scroll through and make
selections from within your information display. Use the
right-hand controls to adjust audio volume and media
selection, and to activate the voice control*.
5
WINDSHIELD WIPERS AND WASHERS
Rotate the end of the control away from you to increase
the wiper speed and toward you to decrease the wiper
speed. Your vehicle may have:
Speed dependent wipers: when your vehicle speed
increases, the interval between wipes decreases.
Autowipers: The Autowipers feature uses a rain sensor
in the area around the interior mirror. The rain sensor
monitors the amount of moisture on the windshield and
automatically turns on the wipers. It will adjust the wiper
speed by the amount of moisture that the sensor detects
on the windshield. For more information, please see the
Wipers and Washer chapter in your Owner’s Manual.
To use the washer feature, push the end of the lever.
Note: For optimal wiper performance, clean your blades
and glass regularly.
6
INFORMATION DISPLAY
*
Monitor vehicle systems and receive alerts from your
information display. Use your steering wheel controls
to scroll through menus and make selections and
adjustments to configure certain vehicle features.
Gauge Mode
displays features such as transmission
temperature and compass data. Diesel-specific
information includes engine oil temperature and exhaust
filter information.
Trip A and B
include trip distance, trip time, fuel used and
average fuel economy.
Fuel economy
also provides instant fuel economy, fuel
history in select increments and saves your last five resets.
Truck apps
* include details about trailers and
off-road features.
Settings
menu delivers a variety of features such as Driver
Assist, Vehicle, Language, Units and more. Refer to your
Owner’s Manual for more information.
7
SERVICE ENGINE SOON LIGHT
Lights briefly when you switch the ignition on. If it remains
on or blinks after you start the engine, the On-Board
Diagnostics (OBD-II) system detects a problem. Drive in
a moderate fashion and contact an authorized dealer as
soon as possible.
8
AUTOMATIC
®
TRANSMISSION
*
Change gears without a clutch. Put the gearshift into
manual (M) and press
+
to upshift and
–
to downshift.
To lock gears, put the gearshift lever into overdrive (D)
and press
–
to lock out the gears. Only the available gears
display. Press
+
to unlock the gears.
9
TOW HAUL MODE
Activate tow haul to eliminate excessive transmission
shifting when traveling on a grade. To switch on tow haul,
press the button on the gearshift lever. The TOW HAUL
indicator light appears in the information display. Refer to
the Transmission chapter of your Owner’s Manual for
more details.
10
KEYLESS STARTING
Allows you to start your vehicle by pressing the
START STOP button while fully pressing down on the brake
pedal. Press the button again to switch the engine off. If
you leave your vehicle idling for an extended period of time,
the engine shuts down automatically. Before this happens,
a message appears in the information display, allowing you
time to override the shutdown feature.
Note: Your intelligent access transmitter* must be inside
the vehicle for the ignition to start.
INSTRUMENT
PANEL
*IF EQUIPPED
6
9
5
4
3
1
4
5
7
8
10
2
