28.
To lock all doors, press the 7/8 and the 9/0 keys simultaneously.
You do not have to enter a 5-digit code.
E. Changing the cover
NOTE:
The RF keypad kit comes with 2 covers (textured-black and primed). If a painted cover is desired, paint
the primed cover to the desired color.
29.
Remove the textured cover by prying at the corners with a plastic or wooden tool.
Snap the painted cover into place.
F. Low Power Warning
30.
If you unlock the door with the keypad and the locks cycle one additional time, it is time to replace
the unit.
The battery is not replaceable.
G. Anti-Scan Mode
31.
If the wrong code has been entered 7 times (35 consecutive button presses) the keypad is disabled
for one minute and the keypad lights will flash during this time.
H.
To Remove a Personal Code, If Desired
32.
Enter the factory code, then within five seconds press and hold the 1/2 button, for 5 seconds. The
vehicle will unlock, lock and then unlock to confirm that your personal code has been removed.
The 9/0 key will flash four times (2 quick then 2 slow) to confirm that your personal code has
been removed.
33. Release the 1/2 button.
I.
Owners Instructions
34. Place this sheet with the vehicles owner’s manual when programming and installation are complete.
This device complies with part 15 of the FCC rules and with RS
S
-210 of Industry Canada. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate this equipment
Page 4 of 4
SK7L2J - 19G544 – AA
© Ford 2007 FoMoCo
