![Ford Mustang Shelby GT500 2020 Скачать руководство пользователя страница 58](http://html.mh-extra.com/html/ford/mustang-shelby-gt500-2020/mustang-shelby-gt500-2020_supplement-manual_2318524058.webp)
GENERAL INFORMATION
Lifting Your Vehicle
A
B
A
1
2
20
3
A
A
E311783
Hoist pad.
A
Rocker molding.
B
Hoist arm.
C
Sill flange.
D
Using a Two Post Vehicle Hoist
When using a vehicle hoist, make sure the
rocker moldings (B) do not contact or
interfere with the hoist arms (C) or damage
to your vehicle may occur.
Follow these steps to hoist your vehicle:
1.
Align your vehicle with the hoist and
position the hoist pads (A) to align with
the sill flange (D).
2. Lift the hoist until all four hoist pads
(A) make contact with the sill flange
(D).
Note:
The hoist pad (A) may contact the
bottom of the rocker molding (B). If the
vehicle is hoisted from the proper location
this does not damage the part.
3. Inspect all hoist arms (C) for any
interference or contact with the rocker
molding (B).
4. If there is no contact with any hoist arm
(C), your vehicle can be lifted safely.
If there is contact with any hoist arm
(C), do not lift the vehicle and follow
these instructions:
1.
Make sure the hoist arms (C) are fully
lowered to the ground.
2. If necessary, adjust the hoist pad (A)
height until it makes contact with the
sill flange (D) and the rocker molding
(B) is clear from the hoist arm. Hoist
pad (A), height can usually be adjusted
by rotating the hoist pad (A)
counter-clockwise.
3. If the vehicle hoist does not use
adjustable pads, install spacers onto
the hoist pad (A) for the same effect.
Note:
Do not use wood spacers as they
could split along the grain of the wood.
55
Mustang (CZG) GT500, United States of America, Vehicles With: SVT Performance Package, enUSA, First-Printing
Vehicle Care
Содержание Mustang Shelby GT500 2020
Страница 3: ......