Ford Mustang Shelby GT500 2020, Инструкция к добавке

Страница: 47 / 96

WARNING: Track Apps™ is for
track use only. Remember that even
advanced technology cannot defy the
laws of physics. It is always possible to
lose control of a vehicle due to
inappropriate driver input for the
conditions. Aggressive driving on any
road condition can cause you to lose
control of your vehicle increasing the risk
of personal injury or property damage.
Participating in track events or other
competitive driving without following the
instructions provided may affect the
vehicle warranty. See the warranty manual
before using the vehicle for racing or other
competitive driving.
Operating at High Speeds and on
Track Days
Your vehicle is capable of sustained high
speeds and track day driving.
Note: Obey all traffic laws and only operate
your vehicle at locations designed to do so
safely.
Before operating your vehicle at high
speeds, follow these guidelines:
•
Inspect wheels and tires for wear and
damage. Replace any damaged wheels
or tires.
• Verify your tires have the correct tire
pressure. See
Tires (page 58).
• Do not operate your vehicle at high
speeds with more than one additional
passenger or while carrying cargo.
• Verify that the engine oil, engine
coolant and brake fluid are at
appropriate levels.
• Your vehicle has electronic controls to
reduce power and/or limit RPM to
reduce powertrain temperatures if
required.
• Perform the brake burnish procedure
found later in this section.
Prior to track or other events at high speed:
•
Change the engine oil with fresh
Motorcraft/Ford SAE 5W-50 Full
Synthetic Motor Oil and replace the
engine oil filter prior to the event.
Change the engine oil and filter again
after every four hours of track time.
• Replace the brake fluid with fresh
Motorcraft/Ford DOT 4 LV High
Performance Brake Fluid or other DOT
compliant fluid with a dry boiling point
greater than 500°F (260°C) from a
sealed container. Do not use silicone
or DOT 5 brake fluids.
Regularly check the engine oil level during
the event. If the oil level is between the
lower and upper holes, the oil level is
acceptable. DO NOT ADD OIL. If the oil
level is below the lower hole, a message
appears in the information display. Add
enough oil to raise the level within the
lower and upper holes. See
Engine Oil
Check (page 39).
Replace the rear axle fluid after
500 mi (800 km) of track use or
when a warning indicator and
red warning message appears in the
information display stating that the axle is
over temperature. See
Special Operating
Conditions Scheduled Maintenance
(page 77).
Track Apps™
This feature provides a suite of menu
options to record and optimize your track
performances. See
General Information
(page 13).
44
Mustang (CZG) GT500, United States of America, Vehicles With: SVT Performance Package, enUSA, First-Printing
Track Use