E209826
6. There is a distinct change from light to
dark in the right-hand portion of the
headlamp beam pattern. Position the
top edge of this cut-off 7.5 cm (3 in)
below the horizontal reference line.
E187824
7.
To adjust the vertical aim, use a
suitable tool to rotate the adjuster
clockwise or counterclockwise.
Note:
To see a clearer light pattern while
adjusting one headlamp, block the light
from the other headlamp.
8. Close the hood and switch the low
beam headlamps off.
Horizontal Aim Adjustment
Horizontal aim should not be required
although it is adjustable.
E209667
1
X
1.
Locate the adjuster within the
extension tube attached to the rear of
the headlamp assembly.
2. To adjust the horizontal aim, use a
suitable tool to rotate the adjuster
clockwise or counterclockwise.
Note:
X: Toward the front of the vehicle.
CHANGING A BULB
WARNINGS
Switch the lamps and the ignition off.
Failure to do so could result in
serious personal injury.
169
Mustang (CZG, CZY) Vehicles Built From: 02-05-2016, HR3J 19A321 AKA enGBR, First Printing
Maintenance
Содержание Mustang 2017
Страница 1: ...Owner s Manual ...
Страница 2: ...May 2016 First Printing HR3J 19A321 AKA ...
Страница 4: ......
Страница 314: ...310 Mustang CZG CZY Vehicles Built From 02 05 2016 HR3J 19A321 AKA enGBR First Printing ...