Ford Ka 2008, Руководство пользователя

Страница: 123 / 173

122
SAFETY
ST
AR
TING
AND DRIVING
W
ARNING
LIGHTS AND MESSAGES
SER
VICING
AND CARE
TECHNICAL
SPECIFICA
TIONS
INDEX
KNOWING YOUR CAR
IN AN
EMERGENCY
MAIN BEAM/DIPPED
HEADLIGHTS
To change the bulb, proceed as follows:
❒
remove the protecting rubber cap
mentioned above;
❒
press on the central electrical
connector
A-fig. 17 and withdraw
the unit;
❒
remove the bulb B and replace it;
❒
fit the new bulb, aligning the outlines
of the metallic part with the grooves
on the reflector;
❒
refit the bulb holder catches and
reconnect the electrical connector;
❒
refit the cap A , ensuring that it locks
into place.
To change the bulb, proceed as follows:
❒
lever the lens off, by initially applying
force from the front towards the
back (
1-fig. 16a );
❒
then lever in the opposite direction,
by applying force from the back part
(
2-fig. 16b ) and remove unit B
❒
turn the bulb holder
counterclockwise, remove the snap-
fitted bulb and replace it;
❒
reinstall the bulb holder into the lens,
then install the unit B making sure
that the fixing clip has clicked.
fig. 17
KA00089m
DIRECTION INDICATORS
Front
To change the bulb, proceed as follows:
❒
turn the bulb holder clockwise
A-fig. 15 and withdraw it;
❒
remove the bulb B pushing it gently
and turning counterclockwise
(bayonet fitting), then replace it;
❒
refit the bulb holder A by turning it
clockwise and locking it properly;
Side
WARNING The intervention must
be carried out taking all precautions
necessary to avoid damaging the
bodywork (please use a sufficiently rigid
and appropriately thick plastic card).
fig. 16a
1
KA00153m
fig. 16b
KA00154m
fig. 15
KA00087m
105-132 Ford KA EN 08/04/14 08:39 Pagina 122