EN
Copyright © 2015
P a g e
|
7
www.Ford-tools.com
7.3
Replacing the grinding disc
Beware
–
a disc which has been used may be very hot!
Fig. 3
Fig. 4
Pull out the power plug from the mains socket.
Depress and hold down the spindle lock button (2) to secure the spindle.
Turn the shaft until it locks.
Remove the
outer flange (a) and backing flange (b) by using the two-hole
spanner provided.
Fit the desired disc (8) on the spindle and replace the outer flange and backing
flange. Release the spindle lock.
Important! Only ever press the spindle lock when the motor
and grinding spindle are at a standstill!
You must keep the spindle lock pressed while you change the wheel !
For grinding wheels up to approx. 3 mm thick, screw on the flange nut with the
flat side facing the grinding wheel.
Two hole
spanner
FX1-1070
