![Ford Flex 2018 Скачать руководство пользователя страница 87](http://html1.mh-extra.com/html/ford/flex-2018/flex-2018_owners-manual_2318351087.webp)
INSTRUMENT LIGHTING
DIMMER
E163270
Adjust the brightness of the instrument
panel and all applicable lit components in
the vehicle during headlamp and parking
lamp operation.
•
Tap the top or bottom of the control
to brighten or dim all interior lit
components incrementally.
•
Press and hold at the first position the
top or bottom of the control until you
reach the desired lighting level.
•
Press and hold the top of the control
to the full on position to activate the
“dome on” feature. This turns on the
interior courtesy lights. The lights
remain on until you press the bottom
of the control.
HEADLAMP EXIT DELAY
Set the delay time to keep the headlamps
on for up to three minutes after switching
off the ignition.
Follow the steps below to change the
delay time:
Note:
Complete steps 1 through 6 within 10
seconds.
1.
Switch the ignition off.
2. Select the autolamp position on the
lighting control.
3. Switch the lighting control to the off
position.
4. Switch the ignition on.
5. Switch the ignition off.
6. Select the autolamp position on the
lighting control. The headlamps and
parking lamps turn on.
7.
Switch the lighting control to the off
position when reaching the required
delay time. The headlamps and parking
lamps turn off.
Set the headlamp exit delay to one of the
following settings:
•
Off.
•
10 seconds.
•
20 seconds.
•
120 seconds.
Note:
Adjust the time delay using the
display controls in the information display.
See
DAYTIME RUNNING LAMPS
(If
Equipped)
WARNING
The daytime running lamps system
does not activate the rear lamps and
may not provide adequate lighting
during low visibility driving conditions.
Make sure you switch the headlamps on,
as appropriate, during all low visibility
conditions. Failure to do so may result in a
crash.
The system turns the lamps on in daylight
conditions.
To switch the system on, switch the
lighting control to the off, autolamp or
parking lamp position.
84
Flex (TP3) , enUSA, Edition date: 201801, Second Printing
Lighting
Содержание Flex 2018
