Changing the Set Speed
•
Press
SET+
or
SET-
to change the set
speed in small increments.
•
Press the accelerator or brake pedal
until you reach the desired speed. Press
SET+
or
SET-
.
•
Press and hold
SET+
or
SET-
to
change the set speed in large
increments. Release the control when
you reach the desired speed.
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed displays continuously in the
information display when the system is
active.
Canceling the Set Speed
Press
CNCL
or tap the brake pedal. The
set speed does not erase.
Resuming the Set Speed
Note:
Only use resume if you are aware of
the set speed and intend to return to it.
Press
RES
. Your vehicle speed returns to
the previously set speed and gap setting.
The set speed displays continuously in the
information display when the system is
active.
Automatic Cancellation
Note:
If the engine speed drops too low, an
audible warning sounds and a message
appears in the information display.
Automatic braking releases.
The system does not operate below
12 mph (20 km/h).
Automatic cancellation can also occur if:
•
The tires lose traction.
•
The engine speed is too low.
•
You apply the parking brake.
Hilly Condition Usage
Note:
An audible alarm sounds and the
system shuts down if it applies brakes for
an extended period of time. This allows the
brakes to cool. The system functions
normally again after the brakes cool.
Select a lower gear when the system is
active in situations such as prolonged
downhill driving on steep grades, for
example in mountainous areas. The
system needs additional engine braking in
these situations to reduce the load on the
vehicle’s regular brake system to prevent
it from overheating.
Switching Adaptive Cruise Control
Off
Note:
You erase the set speed and gap
setting when you switch the system off.
Press
OFF
when the system is in standby
mode, or switch the ignition off.
Detection Issues
WARNINGS
On rare occasions, detection issues
can occur due to the road
infrastructures, for example bridges,
tunnels and safety barriers. In these cases,
the system may brake late or
unexpectedly. At all times, you are
responsible for controlling your vehicle,
supervising the system and intervening, if
required.
If the system malfunctions, have your
vehicle checked as soon as possible.
The radar sensor has a limited field of view.
It may not detect vehicles at all or detect
a vehicle later than expected in some
situations. The lead vehicle graphic does
not illuminate if the system does not
detect a vehicle in front of you.
193
Flex (TP3) , enUSA, Edition date: 201801, Second Printing
Cruise Control
Содержание Flex 2018
