Ford FE1-61, Оригинальное руководство пользователя

Страница: 14 / 16

Original Instructions
- ７ -
７
Preparation and adjustment
WARNING: Prior to assembly and adjustment always pull out the power plug from
the mains socket.
Changing Bit Holders
Fig. 2
1. Twist and pull forward on the Depth Collar to remove it from the Head Cover, See Fig.
2.
2. Pull the Bit Holder straight out with pliers if it is difficult to remove.
3. Push the new Bit Holder into the Spindle until the shank of the Bit Holder snaps in
place.
4. Replace the Depth Collar onto the Head Cover. Align the ribs on the inside of the
Depth Collar with the grooves on the outside of the Head Cover before snapping the
Depth Collar in place.
2. Turn upper ring
A anticlockwise with the other hand until the drill chuck opening is
large enough to accept the tool.
3 Insert the drill or the screwdriver bit into the drill chuck.
4. Turn ring
B clockwise until the tool is snapped into lock place and clamped tightly.
Remove the tool in the opposite way.
Changing the Bit
1. Twist and pull forward on the Depth Collar to remove it from the Head Cover, see
Fig. A.
2. Pull the Bit straight out with pliers if it is difficult to remove.
3. Push the new Bit into the Bit Holder until the shank of the Bit snaps in place.