FCA-K402
EN
Copyright © 2015
P a g e
|
7
www.Ford-tools.com
9
USE VACUUM CLEANER
9.1
Wet vacuuming
Check that the dust bag has been removed.
The dust bag is NOT suitable for wet vacuuming!
Insert the plug in a mains socket. Switch on using the ON/OFF switch (
8
).
Adjust the suction strength by opening or closing the air outtake (
5
) on the
top of the handle as picture (
Fig.1
) shows.
Empty and dry the barrel when finished. Switch off using the ON/OFF switch.
Disconnect from the mains. Unfasten the barrel lock tabs (
11
), remove the top
(
7
) and pour water and sludge out of the barrel (
10
). Dry inside with a dry
cloth and reassemble.
9.2
Dry vacuuming
Check that the dust bag has been fitted. The dust bag is ONLY suitable for dry
vacuuming.
Note!
The barrel and dust bag must be completely dry. Insert the plug in a
mains socket. Switch on using the ON/OFF switch. Adjust the suction strength
by opening or closing the air outtake (
5
) on the top of the handle as picture
(
Fig.1
) shows.
Empty the dust bag when full. Switch off using the ON/OFF switch (
8
).
Disconnect from the mains. Unfasten the lock tabs (
11
), remove the top (
7
)
and remove the full bag. Empty the dust bag.
Allow to dry completely before replacing it in the vacuum cleaner.
9.3
Blowing (Fig.5)
Fit hose connector into the the air outlet mouth (
3
) as picture (
Fig.5
) shows when
you want to use its blowing function, make sure the connector is secure.
9.4
Buckle subassembly
Adjust a suitable height of buckle subassembly (
2
) by your hand and place the
buckle in buckle ring. It is convenient to place plastic tube of vacuum clear when
the machine was at stop working status.
9.5
Use the correct accessory
Bristle nozzle (
a1
) for bookshelf, windows and table, etc.
Bibulous floor brush (
c
) for floor and carpet, etc.
Crevice nozzle
（
a2
）
for crevices, corners, etc.
Blowing mouth for blowing the dust away in the crevice of the machine.
10
TECHNICAL DATA
Model
FCA-K402
Nominal voltage
230V-50Hz
Power consumption
1200W
Suction power (vacuity)
120W
Blow power (Pressure)
16kPa
Tank volume
20L