FCA-K402
EN
Copyright © 2015
P a g e
|
5
www.Ford-tools.com
a.
Do not force the power tool. Use the correct power for your
application
.
The correct power tool will do the job better and safer at the
rate for which it was designed.
b.
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c.
Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d.
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e.
Maintain power tools.
Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tools operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained power tools.
f.
Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g.
Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
the work to be performed.
Use of the power tool for operations different
from intended could result in a hazardous situation
.
5.5
Service
a)
Have your power tool serviced by qualified repair person using only
identical replacement parts
. This will ensure that the safety of the power
tool is maintained.
6
SPECIAL SAFETY INSTRUCTIONS
Check before operation that the local power supply is same as the specification
on the rating label.
Do not use machine in the combustible and explosive place in case the motor
spark cause fire.
Do not overturn the machine in case water goes into the motor and damage
the motor.
Turn off the machine and remove the plug each time after using or when
repairing.
Keep machine away from strong sunlight and high temperature in case plastic
distorting.
Do not wrest, tramp, or haul hose in case make it damaged.
Do not immerse the barrel cap into water, nor wash with water. Electric shock
and/or personal injury may occur in case water penetrates into the electrified
parts. Only use a damp cloth to wipe off dirt.
Take extra care when vacuuming stairs due to the risk of falling.
Do not use for vacuuming up matches, hot ashes, cigarette butts, hard or
sharp objects, flammable materials (petrol, solvents etc) or fumes from the
same.
Do not use for vacuuming up harmful dust.