Ford EVEREST 2015, Руководство пользователя

Страница: 50 / 437

GENERAL INFORMATION
Condensation in Lamp Assemblies
Exterior lamps have vents to
accommodate normal changes in air
pressure.
Condensation can be a natural by-product
of this design. When moist air enters the
lamp assembly through the vents, there is
a possibility that condensation can occur
when the temperature is cold. When
normal condensation occurs, a fine mist
can form on the interior of the lens. The
fine mist eventually clears and exits
through the vents during normal operation.
Clearing time may take as long as 48 hours
under dry weather conditions.
Examples of acceptable condensation are:
•
The presence of a fine mist (no streaks,
drip marks or large droplets).
• A fine mist covers less than 50% of the
lens.
Examples of unacceptable condensation
are:
•
A water puddle inside the lamp.
• Streaks, drip marks or large droplets
present on the interior of the lens.
If you see any unacceptable condensation,
have your vehicle checked by an authorized
dealer.
LIGHTING CONTROL
E142449
Off A
Position lamps, instrument panel
lamps, license plate lamps and
tail lamps B
Headlamps C
WARNING
Prolonged use of the position lamps
when the ignition is off will cause the
battery to run out of charge.
Note: Switch on the position lamps within
10 minutes from the key out, reinsert the key
if exceeded.
Select position B on the lighting control to
switch the parking lamps on. The parking
lamps operate with the ignition on or off.
Parking Lamps
WARNING
Prolonged use of the parking lamps
when the ignition is off will cause the
battery to run out of charge.
Note: Switch on the parking lamp within 10
minutes from the key out, reinsert the key if
exceeded.
48
Everest (TEC), EB3B-19G219-YAA enAUS
Lighting