Ford EVEREST 2015, Руководство пользователя

Страница: 203 / 437

3. Connect the positive (+) terminal of
vehicle B with the positive (+) terminal
of vehicle A (cable C).
E205764
4. Connect the negative (-) terminal of
vehicle B to the ground connection of
vehicle A (cable D).
WARNINGS
Do not connect directly to the
negative (–) terminal of the flat
battery.
Make sure that the cables are clear
of any moving parts and fuel delivery
system parts.
To Start the Engine
1. Run the engine of vehicle B at a
moderately high speed.
2. Start the engine of vehicle A.
3. Run both vehicles for a minimum of
three minutes before disconnecting the
cables.
WARNING
Do not switch the headlamps on
when disconnecting the cables. The
peak voltage could blow the bulbs.
Disconnect the cables in the reverse order.
POST-CRASH ALERT SYSTEM
The system flashes the direction indicators
and sounds the horn (intermittently) in the
event of a serious impact that deploys an
airbag (front, side, side curtain or Safety
Canopy) or the s
eat
belt pretensioners.
The horn and indicators will turn off when:
•
You press the hazard control button.
• You press the panic button on the
remote entry transmitter (if equipped).
• Your vehicle runs out of power.
Note: The horn will not sound after a
serious impact if the emergency assistance
is triggered by SYNC.
201
Everest (TEC), EB3B-19G219-YAA enAUS
Roadside Emergencies