Using the Systems
BLIS® turns on when the engine is started and the vehicle is driven
forward above 3 mph (5 km/h); it remains on while the transmission is in
D (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral),
the system enters CTA mode. Once shifted back into D (Drive), BLIS®
turns back on when the vehicle is driven above 3 mph (5 km/h).
Note:
BLIS® does not function in R (Reverse) or P (Park) or provide
any additional warning when a turn signal is on.
CTA detects approaching vehicles from up to 45 feet (14 meters) away
though coverage decreases when the sensors are blocked. Reversing
slowly helps increase the coverage area and effectiveness.
WARNING:
To help avoid personal injury, NEVER use the CTA
system as a replacement for using the interior and exterior
mirrors and looking over your shoulder before backing out of a parking
space. CTA is not a replacement for careful driving and only an assist.
In this first example, the left sensor is only partially obstructed; zone
coverage is nearly maximized.
Zone coverage also decreases when parking at shallow angles. Here, the
left sensor is mostly obstructed; zone coverage on that side is severely
limited.
Driving Aids
227
2013 Edge
(edg)
Owners Guide gf, 4th Printing, November 2012
USA
(fus)
Содержание EDGE 2013
Страница 165: ...Power Seat Adjustments Power Lumbar 164 Seats 2013 Edge edg Owners Guide gf 4th Printing November 2012 USA fus ...
Страница 242: ...Example only Load Carrying 241 2013 Edge edg Owners Guide gf 4th Printing November 2012 USA fus ...
Страница 365: ...364 Scheduled Maintenance 2013 Edge edg Owners Guide gf 4th Printing November 2012 USA fus ...