6. Return to your car.
7. Press and hold the function button you
want to program for two seconds, then
release. Repeat this step. Depending on
your brand of garage door opener, you
may need to repeat this sequence a third
time.
To program additional buttons, repeat Steps 1 – 4 .
For questions or comments, please contact HomeLink® at
www.homelink.com or 1-800-355-3515.
Erasing the Function Button Codes
Note:
You cannot erase individual
buttons.
1. Press and hold the outer two function
buttons simultaneously for approximately
20 seconds until the indicator lights above
the buttons flash rapidly.
2. When the indicator lights flash, release
the buttons. The codes for all buttons are
erased.
Reprogramming a single button
To program a device to a previously trained button, follow these steps:
1. Press and hold the desired button.
Do NOT
release the button.
2. The indicator light will begin to flash after 20 seconds. Without
releasing the button, follow Step 1 in the
Programming
section.
For questions or comments, contact HomeLink® at www.homelink.com
or 1-800-355-3515.
Programming HomeLink to a Genie Intellicode 2 garage door
opener
Note:
The Genie Intellicode 2 transmitter must already be programmed
to operate with the garage door opener.
Universal Garage Door Opener (If Equipped)
171
2013 Edge
(edg)
Owners Guide gf, 4th Printing, November 2012
USA
(fus)
Содержание EDGE 2013
Страница 165: ...Power Seat Adjustments Power Lumbar 164 Seats 2013 Edge edg Owners Guide gf 4th Printing November 2012 USA fus ...
Страница 242: ...Example only Load Carrying 241 2013 Edge edg Owners Guide gf 4th Printing November 2012 USA fus ...
Страница 365: ...364 Scheduled Maintenance 2013 Edge edg Owners Guide gf 4th Printing November 2012 USA fus ...