Ford Content Скачать руководство пользователя страница 180

Страница: 180 / 336

Folding the middle 2nd row seat (If equipped)

1. Locate the lever on the top of the
seatback.

2. Pull the lever up and push the
seatback toward the front of the
vehicle.

3. Press down on the top outboard
area of the seatback until a click is
heard.

To return the seatback to the
upright position:

1. Pull the lever and lift the
seatback toward the rear of the
vehicle.

2. Rotate the seatback until you
hear a click, locking it in the upright
position.

3rd row stow feature

The 3rd row seat has a tip/stow feature to increase cargo space without
removing the seat from the vehicle.

Lower the head restraints before putting the seat in the stowed position.

Seating and Safety Restraints

180

Содержание Content

















































































































































































































































































































































Результаты поиска

Содержание Content

Отзывы:

Бренды по названию

Популярные бренды

Ford Content, Руководство пользователя

Результаты поиска

Содержание Content

Отзывы:

Бренды по названию

Популярные бренды